The high frequency vibrating screen is mainly composed by the exciter, ore slurry distributor, screen frame, rack, suspension spring, the sieve and other components, which is the classifying and screening equipment for the materials after they are crushed and grinded. In the using process, the sieve of the Vibrating screen may have various faults. For example, the sieve holes are too small, and the amplitude of the screen is too small, which will affect the normal production of the machine. Therefore, the users need to take appropriate prevention and resolution measures to avoid and reduce the incidence of failure.
First, if the high-frequency vibration sieve can not start or the amplitude is too small. You should first consider if the motor is damaged or the components in the line are damaged. The local voltage may be insufficient. If the three aspects are normal, you can find the reasons from the machinery. The many materials stacking on the sieve surface will have direct impact on the vibrating screen. Therefore, you should timely remove the materials on the sieve surface. Then you should check if the bolts of the coupling on the exciter fall off and if the grease caking. In this case, you can clean and repair the exciter and then appropriately adjust the weighing blocks of the eccentric shaft or the position of the vice eccentric block.
According to statistics, every year after breaking ground materials reached more than 10 billion tons. Brittle materials production in China has reached more than 1.5 billion, of which about 240 million tons of iron ore, non-ferrous metal ore over 100 million tons, more than 260 million tons of non-metallic minerals, chemicals more than 030 million tons of minerals, some more than 400 million tons of cement, building materials with more than 470 million tons of rock. The above data, we have broken the project can be found in the national economy plays a huge role.
Suppose a client has a load of materials that they need to be broken down in to smaller sizes. An aggregate miner would be the person of choice to come to in order to have the material broken down. The miner will then use their industrial crusher to convert the minerals into a smaller size; possibly even dust. The client then pays for the work that has been done. This job of the miner calls for the obtainment of a crusher that can do the job. For this reason, it is important that miners consider if they will offer such services or only use crushing as a part of their other mining activities.