02012-8-19 shaker works 2011-3-30 shaker must be very familiar with the shaker is how to work perhaps everyone is not clear it, here we introduce the working principle of the shaker : ?material in the zonation of the bed surface and interception.Appropriate operating conditions,hammer crusher the material in the shaker zonation is obvious, and the product is taken in accordance with the requirements of separation indexes can be divided into 2 to 4 kinds of products.Mine generally to be reprocessed.When operating conditions change, the zoning situation will change, access location must also be adjusted accordingly, in order to ensure the stability of the sorting indicators.The shaker operating personnel to remain at their posts, closely monitored zonation, ready to make the necessary adjustments.?In addition, Shaker transverse slope is also compatible with the lateral flow size have good sorting effect.?rinse water size should be appropriate.Rinse water, including mineral water and wash water, rinse water distribution in the bed surface should be uniform, the size should be appropriate.Rinse water to improve concentrate grade, but the recovery rate is decreased.General handling coarse materials or Featured rinse water to be bigger.Dryer?appropriate to the ore concentration.The ore concentration Shaker beneficiation pulp can to ensure adequate liquidity and can be stratified along the bed surface, the water depth of the submerged mineral particles.General sorting, coarse sand to the mineral concentration of 20%.30% of fine-grained mineral concentration of 15% to 25%.Along the tailings with most of the water in the mine transverse shed, fine mud easily be washed away, resulting in the loss of fine-grained metallic minerals.To ?appropriate stroke and of stroke.Stroke and rushed times the appropriate value and the selected materials granularity,Conveyor Shaker load and ore density.When dealing with a large size bed layer thickness of the material,cone crusher using a large stroke and a small red times;,rotary kiln the opposite is true when dealing with fine sand and slime, a small stroke and of stroke should be used.Bed load increases or larger density materials selection should be larger stroke and stroke.Stroke, the appropriate value of stroke in practice carefully examined to determine.
_________