First line for cutting of transformer laminations of up to 1250 mm width
Where creativity and technically leading knowledge push the progress, the eye for new solutions improving the quality of result counts notably. According to this principle, the GEORG transformer division engineering teams have considerably pushed the state of the transformer lamination cutting line technology with their new developed TBA1200. Up to now, it was necessary to use two narrow laminations side by side for an optimum transformer construction with sheet widths of 1020 up to 1250 mm. For the first time, the new line with swing shear allows for the cutting of the required sheet width of up to 1250 mm from the coil. As it is no longer necessary to place single laminations side by side, the new development also persuades with regard to economy. At the same time, the new production process also leads to a considerable reduction of personnel.
New dimensions with regard to quality and economy
„By means of the precise cutting results of our TBA1200, we enabled a considerable quality improvement during the production of low-loss transformer cores“, emphasises Bernd Peter Schmidt, GEORG transformer division Managing Director.
The TBA1200 cuts electrical sheet of 800 to 6000 mm length and 120 to 1250 mm width and is equipped with a decoiler containing 2 hydraulic decoiler shafts and optionally with a coil turnstile and a coil car. The line is capable to run up to 240 m/min. and has an STA(2) BH stacking system. The following servo-electrically driven tools are installed: V-notches (1 or 2 pieces), hole punches (up to 4, capable for slitting and manual or CNC cut-to-length), slot punching unit, tip cutting shear and swing shear. Optionally, an automatic strip tongue feeding unit can be ordered.
„With or TBA1200, our customers have a technical advantage for their transformer production compared to our competitors“, clarifies Schmidt. „From our decades of experience as world market and technology leader, we know that a high quality and fast reacting production is very important for our customers. Head start needs a good launch which we now offer with our new line – because our technology pays off through success.“ The demand that GEORG transformer division observes by now shows the needs and confidence with regard to the new technology. Two customers are already convinced by the impressive advantages of the TBA1200 and have ordered the line for optimisation of their production processes.
More informations: http://www.georg.com/cms/products-transformer-systems/tba-machines.html
GEORG
Founded in 1948, Heinrich Georg GmbH Maschinenfabrik, is a renowned worldwide partner for advanced and superior mechanical engineering solutions. Our state of the art finishing lines and special machine tools, as well as our superior production systems, machines and equipment for the transformer production industry are used worldwide by leading companies. In its mechanical manufacturing GEORG combines cutting edge science with modern technology for precise dimensional accuracy in all its work pieces.
Over 400 staff members are the driving force behind GEORG“s pioneering spirit which empowers the company to make progress happen and to create lasting values. Our openness helps us in winning the trust needed for lasting partnerships. GEORG sets great store by knowing where its customers come from and where they are heading for.
As a globally thinking medium sized company, GEORG is preparing for the future. Internationally
our subsidiary companies and numerous representative offices guarantee optimum advice and service whereever you are. For your technical head start and our common success.
www.georg.com
GEORG transformer division
As the leading producer worldwide we create innovative solutions with the help of our creativity and scientific head start, while maintaining relentless focus on our customers“ requirements and needs. Over 900 systems produced and delivered to date say something about our customers“ deep trust in pioneering GEORG technology.
The portfolio of GEORG transformer division:
> TBA lamination lines for cutting of „step lap“ core sheets
> Slitting lines (TKS) for slitting of grain-oriented and non-grain-oriented electrical steel
> Reactor core cutting lines (TRKA) for manufacturing toroidal reactor cores
> Wound core production lines (SWA) with eccentric shear for the manufacture of single and three phase transformer cores
> Cutting machines (AMC) for amorphous material
> KLT stacking tables for the rational core assembly
> TKWA finfolding lines for the manufacture of corrugated tanks
> Radiator lines (RAD) for the manufacture of cooling radiators
With their extendable, modular design and intelligent, upgradable control systems, GEORG technologies are more than a match for the challenges of today. And tomorrow.
Kontakt:
GEORG transformer division
Thomas Weber
Siegener Straße 73?83
57223 Kreuztal
+49 (0) 2732 779-0
trafo@georg.com
http://www.georg.com
Pressekontakt:
psv relations
Stefan Köhler
Ruhrststraße 9
57078 Siegen
0271 77001616
s.koehler@psv-marketing.de
http://www.psv-relations.de